• Proudly designed and made in USA

• the innovative P.O.I ® (precision optics interface) addresses 3 of the most critical areas in scope rings – 

A) progressively machined for a precise inner ring surface to achieve a seamless ring-to-scope interaction
b) low profile and flush-fitting locking side plate controlled by dual spring loaded guide rods interfacing with the rail with torx screw locking to ensure secure and repeatable zero hold
c) square-shaped integral recoil stop interfacing with a picatinny slot via complete surface contact to eliminate the possibility of forward and aft movement from recoil vibrations

• 2 piece ring set, each equipped with 4 top torx screws designed with a 22mm ring width 

• designed to fit on mil-spec 1913 picatinny rail platforms 

• machined from 6061-t6 aluminium alloy and 4605 steel with matte black hard coat anodize 

• utg pro® original snag-free contoured profile with reduced weight and size

NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.