Each Stud Mount Monopod attaches to a traditional angled rifle stock via the Sling Stud found on many common rifle stocks and comes ready to attach to your rifle using a common Sling Swivel.
The leg folds up and retracts out of the way when not in use. Every model is constructed of the finest materials and built to the highest standards.
The Standard Quick Knob (QK01-3) allows quick gross adjustments with the push of a button! The Knob has a spring loaded button that when depressed allows the operator to slide the knob up or down on the Actuator Rod quickly into the desired sight picture. When the button is released, the fine threads are re-engaged and the operator can make the final adjustments by rotating the Knob.
Available in black only.
Items received in the box
Accu-shot Stud Mount Monopod
Providing support and stability for those long range shots. A must have for any serious long range shooter
BT01-QK – Standard height stud mount with QK01 Quick Knob
- Height adjustable between 89mm (3.5") and 118mm (4.65")
- Weight 184 grams
BT04-QK – Mid-range height (locking) stud mount with QK01 Quick Knob
- Height adjustable between 95mm (3.75") and 123mm (4.85")
- Weight 207 grams
BT05-QK – Mid-range height (locking) stud mount with QK02 Quick Knob
- Height adjustable between 122mm (4.8") and 149mm (5.85")
- Weight 232 grams
BT06-QK – Extended height (locking) stud mount with QK03 Quick Knob
- Height adjustable between 145mm (7.7") and 174mm (6.85")
- Weight 255 grams
Please note: Part BT03 is required if using with M1A / AR family of rifles
Accu-shot Precision Rail Mount (ARM) Monopod features
- Fits a standard rifle sling stud mount
- Easily fitted and removed
- >No gunsmith required
- Rifle not modified in any way
- Constructed from T6061 Aluminum finished in Hard Anodized black
- Stabilizes the rifle prior to taking the shot
- Height adjustable with fast height adjustments
- Can be fitted with an optional BT07 steel endcap for hardier surfaces
How to determine the best size Accu-Shot Precision Monopod
Please understand that no monopod will be useful across the wide range of shooting situations found in the field. The monopod is offered as an aid, to be used when applicable, not as an answer all. With this in mind, the best we can hope for is to realize a benefit from the Accu-Shot during 85 - 95% of prone shooting and 95-100% from the bench. There are methods to increase the application of the Accu-Shot in fluid or dynamic situations which follow the sizing instructions.
To determine the best monopod for your application the following is offered as a guideline if using a bipod. If you are using another form of front rest, the same procedure applies. You will need something to measure with and a flat level surface.
Set you rifle up on a flat level surface such as a table or shooting bench with the bipod set at the height you most commonly use. Then hold the rifle bore as close to level as possible. Then maintain this position of the rifle while you measure the distance from the point where the monopod attaches (Rear sling stud position measured from the stock or from the flat surface of the rail) down to the supporting flat surface. Then the ideal monopod will give you adjustment on both sides of this measurement.
One consideration you should make is the terrain where you will be using it, if doing range work, measure it there. If hunting, then try to get a measurement on your next trip or reference the rest you used on your last hunt
All Atlas Products bought from Scoped Out are covered by the Australian B&T Industries (Accu-shot) Warranty. Our warranty is about you, not us and it's about taking care of you after the sale.
- Lifetime warranty against faulty parts or workmanship
- Fully transferable
- A receipt will be required so we can trace back proof of purchase
The warranty does not cover loss, misuse, theft or deliberate damage to the product